Sunday, 5 February 2012

Start a Vegetable Oil Refinery Business


(273).Start a Vegetable Oil Refinery Business

Vegetable oil and fat resources are indispensable to mankind as a source of nutrient and 
industrial raw materials. Crude vegetable oil obtained from various oil milling units is 
further refined before use for edible purposes. Refined edible oil is a process where free fatty 
acids are volatized, condensed and recovered simultaneously with vacuum de-colouring 
Sometimes, refining process is limited to simple physical treatment such as heating and 
filtering in regard to refining of superior quality of crude oil. Generally the cake in the oil is 
separated by centrifuge, decolouring by active clay and steam deodorization at high 
temperature in vacuum up to 5 mm. Hg.  This is not a location specific project and can be set 
up at a place where crude oil is easily available. 

It is possible to refine edible oils from crude groundnut oil, sesame oil, mustard oil etc. In 
this project, these three crude edible vegetable oils have been considered for refining 

The importance of edible refined vegetable oils has been appreciated and ambitious plan has 
been chalked out to increase production of edible refined vegetable oils, including soya bean 
110oil, by the Government of India in the previous Five Year Plans. The demand for refined 
edible vegetable oils has increased in the consumer market. With growing population, 
increase in the disposable income and overall trend of consumerism, demand for edible oils is 
shooting up year after year. The country still imports large quantities of crude edible oil and 
the Kandla port of Gujarat is active in such imports. The domestic production has gone up 
during last few years but there still exists a gap between demand and supply which results 
in large imports. Thus a new vegetable oil refinery has got good potential.


Special pre-treatment steps which are essentially a combination of de-gumming and blending 
under special operating conditions, eliminate all impurities and render oil fit to be processed 
at elevated temperature under vacuum.  Various steps involved in refining are
(I) Super cleaning 
(2) Contobleaching and 
(3) De-acidification. 
All these processes are very well standardized and practiced in the country since long. The 
average recovery is 90%

Raw and Packing Materials
The major raw materials required are crude groundnut oil, crude sesame oil and crude 
mustard oil. The state of Gujarat is famous for crude as well as refined vegetable oils with 
centers like Kadi, Rajkot, Gondal, Amreli, Dhaari etc. engaged in production of various edible 
oils round the year. Thus procuring adequate quantity of crude oil will not be a bottleneck. 
Other materials like phosphoric acid, citric acid, bleaching powder etc would be available 
from the nearby trading centres. Aluminum tins or plastic jars of different capacities along 
with corrugated boxes, labels, and box strappings would be the packing materials.

Edible/Vegetable Oil Refining

Process of Oil Refining Plant-1Edible/vegetable oil refining is a step by step process. Refining oil removes phospholipids, pigments, off-flavors, free fatty acids and other impurities. The entire oil refining plant process comprises degumming/neutralization, bleaching, deoderization, and winterization. Chemical refining is performed in order to remove the fatty acids from the crude oil that is extracted from the seeds. These are further neutralized with the use of caustic soda. This results in the removal of sodium soaps by batch settling or centrifugal separators. The neutral oils are then bleached and deodorized.
Apart from chemical refining, another method that is used for edible oil refining is physical refining. Through this method, the free fatty acids are removed through the process of distillation in one stage of deodorizing. In order to come up with effective results, the crude oil should be thoroughly degummed. This is not applicable with some oil like the oil extracted from cottonseeds. All kinds of refining methods are done with the help of various equipment and machinery, and are used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, linseeds, groundnuts, sesame seeds, and mustard seeds, etc.
Physical and chemical refining is defined according to the technology used. Physical refining means the removal of gum in oil via the process of degumming, a special method for removing FFA in the process of deodorization by steam. Chemical refining, however, means chemically removing FFA (acid-base neutralization). Gum and soap produced is then separated by centrifuges.
Oil Refining Plant Technology

Features of Physical Refining

  • High refinement rate; less oil loss
  • No waste water discharged
  • More FFA distilled
  • Especially suited for highly acidic oils, and those of low gum content
Features of Chemical Refining
  • Excellent adaptability and fewer requirements for high oil quality
  • The finished oil is consistent and stable
  • Less bleaching earth necessary compared with physical refining

Process of the Oil Refining Plant

With 10 years' experience in manufacturing and exporting complete oil mills as well as a variety of oil mill machinery, KMEC is an expert in edible oil refining. In the oil refining plant, there are several steps to follow.

Oil Degumming Section of the Oil Refining Plant
Oil Rfining Plant
With 10 years' experience in manufacturing and exporting complete oil mills as well as various oil mill machinery, KMEC is an expert in edible oil refining. In the oil refining plant, there are several steps to follow.

Oil Neutralization Section of the Oil Refining Plant
Oil Rfining 

The pretreated oil is subjected to alkali refining. The caustic soda reacts with free fatty acids (FFA) present in the oil and forms soap stock. The soap stock is then removed by a centrifugal separator and oil is washed with water for the complete removal of soap stock. The wash water is separated out by centrifugal separators.

Oil Deodorization Section of the Oil Refining Plant
Oil Rfining 

PlantAs the name suggests this process is meant for the removal of odor. Every vegetable oil has its own distinct natural odor. During neutralization and bleaching, unpleasant odors are imparted in the oil, thereby making it essential to remove this odor. Deodorization is essentially a process to remove odiferous matter. The operation is carried out at a high temperature by injecting open steam and maintaining high pressure at which time all odoriferous matter is distilled and removed to barometric condensers through a vacuum system. The resultant oil is odorless – deodorized oil.

Oil Bleaching Section of the Oil Refining Plant
The neutralized oil is treated with bleaching earth/activated carbon for the removal of colored pigments. The bleaching agent is filtered out in vertical pressure leaf filters. A multi-part design ensures uniform consistency in color with minimum bleaching agent requirements. The bleaching line is versatile and adaptable for all varieties of vegetable oil.Oil Rfining Plant

Oil Dewaxing Section of the Oil Refining Plant
Oil Rfining PlantOils like sunflower oil or maize germ oil (corn oil) have waxes present in them. At low temperatures these waxes give a hazy appearance to the oil. It is therefore essential to remove these waxes prior to bottling and marketing of the oil.

Some of the equipment and packing machinery suppliers are as under:
1. Sifter International, Plot No. 83, Sector 6, Faridabad-121006
Tel. No. 2231154-4540, Fax: 2230039
2. Osaw Agro Industries Pvt. Ltd., Osaw Complex, Jagadhri Road, Ambala Cant.-133001,
Tel. No. 2699167-354-547, Fax: 2699018
3. Forsberge Agritech (I) Ltd, GIDC Estate, Makarpura, Vadodara
4. Chempro, Engg. and Consultants, 43, Sukhshine Complex, Sunrise Park, Nr. Drive In, 
Ahmedabad-380054. Tel No. 26851135/9010. 
5. Container Industries, C-299, Ghatkopar Industrial Estate, 72 LBS Marg, Mumbai-400080


  1. So many of the interior work are done accessing design work to reach perfect using of Aluminium Scaffolding. Some Exterior wall post and other used Boom lift Rental or Sales purpose. We are many more help to interior architecture finishing. We Sendhamarai Engineering Service Offered Chennai Bangalore Ahmedabad all over india For Sales And Rental

  2. Very Good Point about the your blog when I search in google your blog get ranking good all blog post are very informative. Kindly post about Interior Designs In Chennai & Modular Kitchen in Chennai related.

  3. Mectech's has established itself as a leader in extraction, refining & hydrogenation-processes -acquired over past 40 years of existence and operations in 17 countries. The company's unrelenting focus on technology itself has enabled it to establish itself as the front runner in the turnkey supply of plant & machinery for the vegetable oils and fats industry including for edible Oil Manufacturing Process.

  4. The crude oil obtained either from oil expeller machines or solvent extraction plant contains impurities, which must be removed to make the oil edible.The edible oil refinery plant process of removing these impurities is called refining.

  5. I need to start palm oil packing machine manufacturing