Start a Fire Safety, Detection and Alarming Equipments Business

(166). Start a Fire Safety, Detection and Alarming Equipments Business

                               
Fire alarming has become a need in today's scenario as cities are  developing and there is a need of such type of fire alarming equipments in colonies, malls, duplexes, flats, big industries, kitchens , and many other places. Municipal corporation , govt and insurance companies have made fire  safety norms, and therefore there is a lot of  market growth potential for a new entrepreneur

Fire safety refers to precautions that are taken to prevent or reduce the likelihood of a fire that may result in death, injury, or property damage, alert those in a structure to the presence of a fire in the event one occurs, better enable those threatened by a fire to survive, or to reduce the damage caused by a fire. Fire safety measures include those that are planned during the construction of a building or implemented in structures that are already standing, and those that are taught to occupants of the building.

An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke. 

The Multipoint detector is central to all of our systems and has set new standards in detector technology using microprocessor control even as a conventional detector and offering the installer a full range of detection capabilities with built-in audible warning within one compact device. Detection modes include three smoke modes three heat modes and a combined heat or smoke mode plus a full alarm built-in sounder. Specifiers and installers who choose the Multipoint detector, do so secure in the knowledge that the fire performance can be matched to the environment in which it is installed – and changed at any time during the lifetime of the installation.read more..
Addressable Systems

The unique Multipoint detector can now work as part of an advanced addressable fire detection and alarm system offering the best performance and reliability currently available. The systems have been designed to high specification and quality standards and are intended to fully comply with the new EN54 -2 and EN54 - 4 standards and EU directives.

TWINFLEXpro

TWINFLEXpro is installed using only one pair of wires and two types of devices - Multipoint detectors (with optional sounder) and manual callpoints. Simple, innovative and cost effective.

Auxiliary Products

As well as a comprehensive range of two wire and addressable devices Fike also offers a range of spares and conventional fire alarm products.

  

Fire Detection and Alarm System

The availability of these Fire Detection and Alarm Systems in varied models made them hugely popular among clients. The consistent demand of these Fire Detection and Alarm Systems is evident of their smooth functioning and reliable results 

Variety

• Fire Alarm Control Panel
• Ionization Smoke Detector
• Fixed Temperature Detector
• Manual Call Point
• Repeater Panel
• Photoelectric Smoke Detector
• Electronic Hooter
• Response Indicator

Fire Alarm Main Control Panel

Fire Alarm Control Panels are widely used to control and monitor fire alarm systems through computer. These Fire Alarm Control Panels are connected with control panels, which assist user by providing warning of the affected area. Characteristics Control & monitor the fire alarm systems peripherals Alarm systems peripherals are connected with control panel Provides warning & navigate the fire-affected area Fully solid state Operated with 230V AC & 24V DC Used in Offices Factories Power plants Retail houses

Ionisation Smoke Detector

Ionisation smoke detectors are suitable for a wide of industrial, commercial & residential application & operate on the principle of ionisation. On ingress of smoke into the open chamber of the detector, the resistance caused is measured & transmitted to control panel, which in turn initiates fire alarm. Characteristics Operates on the principal of ionization Check ingress of smoke into the open chamber of the detector Measure resistance cause Transmit information to control panel Initiate fire alarm Used in Commercial sectors Industrial sectors Residential sectors

Fixed Temperature Detector

The detection is a combustion of fixed and rate of rise in temperature operating elements. This detector responds when the predetermined temperature exceeds the predetermined amount. Suitable for installation in areas where smoke/dust is likely to be present.

Manual Call Point

Manual call point is manually operated device to initiate an alarm. These are made of sturdy M.S Enclosure & are provided with hammer to break the glass to initiate an alarm.

Repeater Panel

It is Console to repeat the Fire alarm control panels indications. The repeator panel is manufactured to suit the fire safety requirement.

Photoelectric Smoke Detector

Photo electric detector operate on the light scattering effect. A light source is beamed into an area not normally seen by photosensitive element. These detector are preferred where large particle of combustions are to be detected.

Electronic Hooter

The electronic hooter/Speaker ishoused in a sturdy M.S. Enclosure capable of producing dual tone (Fire Alarm). These hooters can also connected for an amplifier for public address as well. Operates on 24V DC can be surface or flush mounted only.

Response Indicator

The Response Indicator also known as the Remote Response Indicator, as the name suggests OS to visually indicate response of a detector, located in a remote areas such as above the false ceiling, below the false floor & inside rooms normally kept closed or locked after office hours. Mechanical Foam Type Fire Extinguishers.  These Mechanical Foam Type Fire Extinguishers (AFFFF) are especially effective where petrol, paraffin, oil, varnishes, paints spirits, solvents, (class ‘B’ fire) is involved. Characteristics Made IS : 10204 Easy to use Speedy in action Great fire killing power Mounted on rubber Tyred/Iron wheels Easy mobility Fitted with Gun metal unions Nozzles/foam producing branch pipe Functioning They expel a jet of foam, which can be directed onto the fire to quench it instantly Availability Hand portable models are available in 9ltrs. capacity Trolley type Mechanical Foam (AFFF) Model available in 50ltrs. and 153ltrs. capacities Applications Factories Chemical and petro-chemical storages Aerodromes Ships Private estate The Hotel And Kitchen Gas Detection System or FF 400 is a precision engineered gas detection equipment that comes with a field replaceable unit complete with gas sensor, terminal / junction box, gland and more that can be designed as per the requirement. FF-400 is very easy to use and install, and the superior design ensures protection against interferences from electric noise, temperature, humidity and pressure. Domestic Gas Detector Wall-mounted household gas detector designed to detect the concentration of combustible and toxic gases or vapors using high quality air-sensitive component and manufactured with advanced technology. It provides visual and audible signals when the gas concentration reaches the presetting range, and reminds you to take prompt favorable action. You may start up other link equipments, open windows or shut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents. Fire Safety Equipments Manufacturers Synergy Technologies, Ahmedabad Mr. Viral Jhaveri / Mr. Jigar Trivedi  ( Managing Director ) No. 305, Zodiac Plaza, Next Nabard Officer's Society, H. L. Commerce College Road, Navrangpura Ahmedabad, Gujarat - 380 009, India Email : contact@synergytechno.com Telephone : +(91)-(79)-26305332/ 26305333 Mobile : +(91)-9427456057/ 9879530332 Fax : +(91)-(79)-26305335                                                                                                   Gas Vigil Technologies  Mr. C. K. P. Menon 2nd Floor, Saravana Complex, Gautham Nagar, Old Airport Road, Bowenpally Hyderabad, Andhra Pradesh - 500 011, India Telephone:  +(91)-(40)-66485808/ 64575808