(130).Start a Office Furniture Making Plant
In recent years, because of the resource of forest have been lessened and the environmental protection dominating, the furniture materials use more laminated panels (such as plywood, particle board, MDF and etc.) to instead of solid wood.
The panels have different specification for every processing demand, which through surface laminating, cutting, edge banding, boring and etc…become different kinds of K/D (knock down) panels furniture.
The OA furniture is one of the K/D furniture representative, it includes the office table, computer table, desk, files cabinet and etc…That have two separate production lines including table top and cabinet lines.
General Processing Information
Process Description
Plant Description
Machines and Equipments
Production Capacity Regarding OA Furniture produce line, the production capacity is about 700 sets / day for computer table or 600 sets / day for office table.
Manpower Requirement
Electricity Power Requirement
REMARK: Electricity Power for 220V/3Ph/60Hz
Total Budget An OA Furniture produce line, the total budget of equipment from US$150,000 to US$600,000, depending on different product and capacity.
Installation Charge Please note that the installation charge covering as follows will be at buyer’s account if require maker to install M/C at buyer’s factory.
●Round trip air ticket charge
●Lodging & catering charge
●Engineer’s labor cost: US$200/day/person
(including traveling hours)
Limited Warranty All products sold are warranted against defects in workmanship or materials under normal use (rental service excluded) for one year. However, the electric and pneumatic parts are warranted for three months.Liability in all events is limited to the purchase price paid and liability under the aforesaid warranty is limited to replacing or repairing any parts which are defective in materials or workmanship and returned to our branch or an authorized service station as we designate, shipping costs prepaid.
Suppliers Information Company Name: Technik Associates, Inc.
Address: 288, Sec.2, Tanfu Road, Tantzu Hsiang, Taichung, Taiwan
Tel:
Fax: 886-4-25349160
E-mail: technik@ms14.hinet.net
http:// www.hipoint.com.tw
In recent years, because of the resource of forest have been lessened and the environmental protection dominating, the furniture materials use more laminated panels (such as plywood, particle board, MDF and etc.) to instead of solid wood.
The panels have different specification for every processing demand, which through surface laminating, cutting, edge banding, boring and etc…become different kinds of K/D (knock down) panels furniture.
The OA furniture is one of the K/D furniture representative, it includes the office table, computer table, desk, files cabinet and etc…That have two separate production lines including table top and cabinet lines.
General Processing Information
Process Description
Plant Description
Machines and Equipments
NO | DESCRIPTION | POWER | UNIT | APPLICATION |
1. Panel Sizing Section | ||||
01 | Panel Saw | 13 HP | 1 | Panel cut to size |
02 | Auto. Panel Saw | 14 HP | 1 | Panel cut to size |
03 | Hydraulic Table Lifter | 2 HP | 1 | For panel loading |
2. Planning Section | ||||
01 | Single Spindle Shaper | 5 HP | 1 | Edge profiling |
02 | High Speed Router | 5 HP | 1 | Profiling & grooving |
03 | Double End Tenoner | 28 HP | 1 | Panel sizing & profiling |
3. Edge Banding Section | ||||
01 | Edge Banding M/C, Manual | 3 HP | 1 | For edging free shaped panel |
02 | Edge Trimming M/C | 1.5 HP | 1 | Top & bottom edge trimming |
03 | Radius Trimming M/C | 1 HP | 1 | Corner round trimming |
04 | Edge Banding M/C, Linear Series | 10 HP | 1 | For edge banding 0.4 – 3 mm thick PVC or melamine edging |
05 | Edge Banding M/C, Soft forming | 20 HP | 1 | For soft forming edge |
4. Boring & Jointing Section | ||||
01 | Vertical Drilling M/C | 10 HP | 1 | Making connecting holes |
02 | Horizontal + Vertical Boring M/C | 8 HP | 1 | Making connecting holes |
03 | Hinge Inserting M/C | 1.5 HP | 1 | Hinge hole boring & hinge inserting |
04 | Point to Point Machining Center | 15 HP | 1 | Making shelving holes, groove and shank hole routing |
Production Capacity Regarding OA Furniture produce line, the production capacity is about 700 sets / day for computer table or 600 sets / day for office table.
Manpower Requirement
Section | Manpower (Member) |
Plant Manager | 1 |
Production Technician | 2 |
Foreman | 2 |
Panel Sizing | 4 |
Planning | 2 |
Edge Banding | 7 |
Boring & Jointing | 6 |
Table Top Making | 8 |
Peripheral | 3 |
General Worker | 4 |
TOTAL | 39 |
Electricity Power Requirement
Section | Electricity Power (HP/KW) |
Panel Sizing | 29 / 21.75 |
Planning | 38 / 28.5 |
Edge Banding | 49 / 36.75 |
Boring & Jointing | 34.5/25.88 |
Table Top Making | 64 / 48 |
Peripheral | 31.5 / 23.63 |
TOTAL | 246 / 184.51 |
REMARK: Electricity Power for 220V/3Ph/60Hz
Total Budget An OA Furniture produce line, the total budget of equipment from US$150,000 to US$600,000, depending on different product and capacity.
Installation Charge Please note that the installation charge covering as follows will be at buyer’s account if require maker to install M/C at buyer’s factory.
●Round trip air ticket charge
●Lodging & catering charge
●Engineer’s labor cost: US$200/day/person
(including traveling hours)
Limited Warranty All products sold are warranted against defects in workmanship or materials under normal use (rental service excluded) for one year. However, the electric and pneumatic parts are warranted for three months.Liability in all events is limited to the purchase price paid and liability under the aforesaid warranty is limited to replacing or repairing any parts which are defective in materials or workmanship and returned to our branch or an authorized service station as we designate, shipping costs prepaid.
Suppliers Information Company Name: Technik Associates, Inc.
Address: 288, Sec.2, Tanfu Road, Tantzu Hsiang, Taichung, Taiwan
Tel:
Fax: 886-4-25349160
E-mail: technik@ms14.hinet.net
http:// www.hipoint.com.tw
No comments:
Post a Comment